Siding Replacement in Fishers, Indiana with Monterey Sand Ascend® Board and Batten
This Fishers, Indiana siding project was scoped around a defined architectural choice: 9 squares of Ascend® board and batten with cedar mill texture in Monterey Sand 3D. The contract also included home wrap, fascia-related detail work, light block updates, and 8 linear feet of G8 coil in Monterey Sand V5 for a specific rear elevation detail.
Project Gallery
Compare the Fishers siding replacement from the front, side, and rear elevations. The before-and-after views show how Monterey Sand Ascend® Board and Batten changed the home’s wall lines while the close rear details show how the installation worked around exterior utilities.
Project Snapshot
A quick look at the materials, location, and measured scope behind this Fishers siding replacement.
Project Type
Siding Replacement
Location
Fishers, Indiana
Siding Package
9 Squares
Primary Style
Board & Batten
Project Overview
This project was not written as a generic siding order. The paperwork shows a focused vertical siding package with several small but important finishing details on the back of the home.
The main siding selection was 9 squares of Ascend® board and batten with cedar mill texture in Monterey Sand 3D. That matters because board and batten changes the home’s exterior rhythm more than a standard horizontal plank replacement. It creates vertical lines, stronger shadow definition, and a more intentional profile on the areas where it is installed.
The contract also documented 8 linear feet of G8 up to 8" in Monterey Sand V5. On its own, 8 linear feet sounds small. In context, it is one of the strongest project-specific details because the addendum explains where that material was needed: on the back of the home to match an existing cover built for the HVAC wiring.
The addendum also called for one light block to color match the siding to the right of the back door, one electrical split block to color match the siding on the back porch, and one new split block around the exterior hose faucet on the back of the home. Those details make the page more useful because they show how the siding installation had to work around real exterior penetrations, not just flat wall sections.
Why This Siding Was the Best Choice for This Homeowner
The strongest choice on this project was not just the color. It was the combination of vertical board and batten, a warm neutral finish, home wrap, and color-matched rear utility details.
Ascend® Board and Batten for a Stronger Profile
Board and batten gives the exterior a different look than standard horizontal siding. For this Fishers home, the documented 9-square board and batten scope created a more defined siding field without needing multiple decorative profiles.
Monterey Sand Kept the Design Controlled
Monterey Sand 3D gave the vertical siding a warm neutral finish. On board and batten, that matters because the profile itself already adds visual movement. A controlled neutral color helps the siding feel intentional instead of overly busy.
Home Wrap Was Part of the Scope
Home wrap was included in the order details, which keeps the wall prep tied to the siding package. That is important because the work behind the siding affects how complete the installation is, even though homeowners usually notice the finished color first.
Rear Penetrations Were Accounted For
The addendum specifically called out a light block, an electrical split block, and a hose faucet split block on the back of the home. Those items help the new siding work around real utilities instead of leaving mismatched or unfinished penetrations.
Small Coil Detail, Big Finish Difference
The 8 linear feet of G8 coil was not a random accessory. The addendum says it was to be bent and installed on the back of the home to match the existing cover built for HVAC wiring. That is the kind of detail that keeps a siding replacement from looking patched together.
Removal Precautions Were Documented
The project included an EPA-RRP lead paint precautions or asbestos siding removal addendum. The document does not confirm hidden damage, but it does show that older-material precautions were part of the project paperwork.
Built Around This Fishers Home’s Real Details
Instead of leaning on generic weather claims, the most useful details are the ones tied to the home itself: the vertical siding profile, the back door area, the back porch, the exterior hose faucet, and the HVAC wiring cover.
Back Door Light Block
The addendum noted one light block to color match the siding to the right of the back door. That keeps the wall detail from looking like an afterthought once the new siding is installed.
Back Porch Electrical Split Block
The scope included one electrical split block to color match the siding on the back porch. This matters because porch areas are high-visibility, high-use spaces where small mismatches can stand out.
Exterior Hose Faucet Split Block
The addendum included one new split block around the exterior hose faucet on the back of the home. That gives the faucet area a cleaner transition through the new siding.
HVAC Wiring Cover Coordination
Energy Home Improvements was scoped to bend and install G8 coil on the back of the home to match the existing cover built for the HVAC wiring.
Measured Accessory Scope
The additional material total was only 8 linear feet, which shows this was a targeted finish detail rather than a vague catch-all trim allowance.
Vertical Siding Needed Clean Transitions
Board and batten has strong vertical lines, so blocks, outlets, faucets, and utility covers need to be handled cleanly. The documented addendum shows those transitions were considered before installation.
Highlights of the Project
These were the measured materials and project-specific installation decisions that shaped this Fishers siding replacement.
9 Squares of Ascend® Board & Batten
Ascend® board and batten cedar mill texture was selected as the primary siding package.
Monterey Sand 3D
Monterey Sand 3D was used as the main siding color for the vertical board and batten profile.
8 Linear Feet of G8 Coil
G8 up to 8" in Monterey Sand V5 was included for a targeted back-of-home HVAC cover detail.
Color-Matched Light Block
One light block was specified to color match the siding to the right of the back door.
Color-Matched Split Blocks
One electrical split block and one hose faucet split block were included for the back porch and rear exterior.
EPA-RRP / Asbestos Precaution Addendum
The project documents included an addendum for EPA-RRP lead paint precautions or asbestos siding removal needs.
The Result
The finished scope was a focused board and batten siding replacement with documented attention to the small rear-elevation details that often determine whether a project looks truly complete.
More Defined Exterior Profile
The Ascend® board and batten selection gave the siding areas stronger vertical lines and a more intentional appearance.
Controlled Color Plan
Monterey Sand 3D handled the main siding while Monterey Sand V5 was used for the targeted G8 coil detail.
Utility Details Were Integrated
Light, electrical, hose faucet, and HVAC cover details were included in the addendum so the rear wall did not feel unfinished.
Scope Stayed Focused
The project did not balloon into a broad exterior package. It stayed centered on the siding areas and the specific details needed to finish them cleanly.
Thinking About Siding Replacement in Fishers?
Whether your home needs board and batten siding, color-matched exterior blocks, home wrap, or a more complete siding plan, our Energy Guides can help you compare the options that make sense for your home.